The Burton Flight Attendant snowboard mannequin from the 2017-2018 winter season was a directional, all-mountain board designed for versatility and efficiency in varied snow situations. Characterised by a directional camber profile and a medium flex, it aimed to supply a steadiness of stability at larger speeds and maneuverability in tighter terrain. This board appealed to intermediate and superior riders on the lookout for a dependable platform for carving, powder runs, and navigating difficult slopes.
Launched throughout a interval of rising curiosity in versatile all-mountain snowboards, this particular mannequin catered to riders who most well-liked a single board for various driving types. Its design allowed for assured dealing with on groomed runs, whereas its form and building provided enough float in powder. The mix of directional camber and medium flex made it a lovely possibility for riders searching for stability with out sacrificing maneuverability. This skill to carry out effectively in varied situations and cater to a spread of talent ranges contributed to its recognition.
This dialogue will additional discover the board’s design options, together with its directional form, camber profile, and building supplies. Moreover, the efficiency traits, target market, and general reception throughout the snowboarding group will probably be examined.
1. Directional Form
The directional form of the 2018 Burton Flight Attendant performed an important position in its efficiency traits and supposed driving model. Designed for primarily ahead motion, this form influenced how the board interacted with the snow and terrain, contributing to its distinct all-mountain capabilities.
-
Nostril and Tail Design
The Flight Attendant featured an extended nostril and shorter tail. This design aspect facilitated float in powder and supplied stability at larger speeds. The longer nostril helped forestall the board from sinking in deep snow, whereas the shorter tail allowed for faster turns and maneuverability.
-
Sidecut Radius
The sidecut radius, defining the curve of the board’s edge, was probably designed to enrich the directional form. This radius impacted flip initiation and general carving efficiency. Whereas the particular radius would differ based mostly on board size, it typically contributed to a clean, managed experience on groomed runs.
-
Stance Setback
Directional boards typically incorporate a setback stance, the place the rider’s bindings are positioned barely additional again from the middle of the board than on a twin-shaped board. This setback additional enhances float in powder and stability at pace, aligning with the Flight Attendant’s all-mountain designation.
-
Influence on Driving Fashion
The directional form made the 2018 Flight Attendant much less appropriate for swap driving (driving backwards) in comparison with twin-shaped boards. This design alternative prioritized efficiency in ahead driving, catering to riders targeted on carving, powder runs, and exploring diversified terrain.
The directional form, along with different design parts just like the camber profile and flex, contributed to the 2018 Burton Flight Attendant’s versatile all-mountain efficiency. This particular form catered to riders prioritizing stability, float, and management in various snow situations, emphasizing ahead motion and exploration over freestyle driving. Understanding this attribute is essential for appreciating the board’s supposed goal and target market.
2. Directional Camber
The 2018 Burton Flight Attendant employed a directional camber profile, an important aspect influencing its efficiency traits. Directional camber blends conventional camber with a rockered nostril. The camber part underfoot offers edge maintain and responsiveness on groomed runs, producing highly effective turns and stability at pace. The rockered nostril, rising sooner than on a historically cambered board, enhances float in powder and improves maneuverability in variable snow situations. This mix made the Flight Attendant versatile, permitting riders to confidently navigate each groomed pistes and off-piste terrain.
Think about a rider transitioning from groomed runs to ungroomed powder. With directional camber, the board maintains grip and responsiveness on the packed snow. Upon getting into the powder, the rockered nostril lifts the board, stopping it from sinking and sustaining momentum. This seamless transition highlights the sensible significance of directional camber for all-mountain driving. Conversely, a purely cambered board may battle in deep snow, whereas a totally rockered board might lack the precision and stability desired on groomed runs.
Directional camber represents a design compromise geared toward maximizing versatility. Whereas maybe not excelling in any single space, it offers a balanced efficiency throughout a spectrum of situations. This design alternative aligned with the Flight Attendant’s supposed use as an all-mountain board able to dealing with various terrain. Recognizing the consequences of directional camber is important for understanding the board’s strengths and limitations and for making knowledgeable choices about tools choice based mostly on particular person driving preferences and terrain selections.
3. Medium Flex
The 2018 Burton Flight Attendant’s medium flex score considerably contributed to its all-mountain versatility. Flex, referring to a snowboard’s stiffness, dictates how readily it bends and responds to rider enter. A medium flex sits between a tender and stiff flex, providing a balanced efficiency profile. This attribute allowed the Flight Attendant to carry out capably in varied situations, from carving on groomed runs to navigating powder and tackling variable terrain.
A medium flex offers enough responsiveness for exact edge management and highly effective activates groomed slopes. Nevertheless, in contrast to stiffer boards designed primarily for high-speed carving, the Flight Attendant’s medium flex allowed for simpler maneuverability in tighter areas and thru difficult snow situations. This adaptability proved useful in bushes, moguls, and different off-piste environments. Moreover, a medium flex absorbs vibrations and impacts extra successfully than a stiff flex, providing a smoother and fewer fatiguing experience in uneven snow. This attribute enhanced consolation and management in variable situations.
Think about a situation involving a descent on a mixed-condition slope. The medium flex allowed riders to take care of stability and management at larger speeds on firmer patches, whereas nonetheless enabling nimble changes and easy turns in softer sections. This steadiness made the Flight Attendant a great alternative for riders searching for a single board able to dealing with various terrain. Understanding the implications of medium flex is essential for assessing the board’s efficiency traits and suitability for particular person driving types and preferences. This attribute highlights the board’s supposed use as a flexible all-mountain instrument, balancing efficiency and accessibility for a broad vary of riders.
4. All-Mountain Versatility
The 2018 Burton Flight Attendant’s defining attribute was its all-mountain versatility. This stemmed from a deliberate mixture of design parts, enabling competent efficiency throughout a variety of snow situations and terrain. The board’s directional form, directional camber profile, and medium flex labored synergistically to supply a balanced experience, catering to riders who prioritized adaptability over specialization. This versatility stemmed from the necessity for a single board able to dealing with groomed runs, powder, and variable snow situations encountered all through a typical day on the mountain.
Think about a hypothetical situation: a rider begins the day carving on freshly groomed corduroy. The Flight Attendant’s directional camber and medium flex supplied the required edge maintain and responsiveness for exact turns and secure efficiency at pace. Because the day progresses and the rider ventures into off-piste terrain with ungroomed snow and powder pockets, the directional form and rockered nostril facilitated float and maneuverability. Later, encountering chopped-up snow and variable situations, the medium flex absorbed vibrations, providing a smoother experience. This adaptability eradicated the necessity to swap boards all through the day, a key benefit for all-mountain riders.
The emphasis on all-mountain versatility displays a broader pattern in snowboarding in the direction of adaptable tools able to dealing with various terrain. The 2018 Flight Attendant exemplifies this pattern, providing a balanced efficiency profile appropriate for intermediate and superior riders searching for a single board for various situations. Recognizing the design selections contributing to this versatility offers worthwhile perception into the board’s supposed goal and efficiency capabilities. This understanding permits riders to make knowledgeable choices about tools choice based mostly on particular person wants and driving preferences. Whereas specialised boards may excel in particular situations, the Flight Attendant prioritized adaptability, providing a dependable and pleasing expertise throughout a wider spectrum of terrain.
5. Intermediate to Superior Riders
The 2018 Burton Flight Attendant’s design particularly focused intermediate to superior snowboarders. A number of elements contributed to this focus, together with the board’s efficiency traits and supposed driving model. The directional form, directional camber, and medium flex demanded a sure degree of rider competence to unlock their full potential. Rookies may discover these traits difficult to handle, whereas skilled riders might leverage them for exact management and dynamic efficiency.
Think about the board’s efficiency in powder. The directional form and rockered nostril facilitated float, however successfully maneuvering in deep snow required expertise and approach. Equally, the directional camber and medium flex enabled aggressive carving on groomed runs, however demanded management and precision to forestall edge catch. An intermediate rider progressing to superior strategies would profit from these traits, regularly growing the abilities crucial to take advantage of the board’s capabilities. Conversely, a newbie may discover the board overly responsive and troublesome to manage, hindering talent growth. A extremely superior rider focusing totally on freestyle or park driving may want a board with a special form, flex, and camber profile.
The deal with intermediate to superior riders highlights the Flight Attendant’s place inside Burton’s product line. It served as a stepping-stone for riders transitioning from beginner-friendly boards to extra specialised tools. This concentrating on emphasizes the significance of matching tools to talent degree for optimum efficiency and pleasure. Deciding on a board acceptable for one’s talent degree maximizes studying potential and minimizes frustration, contributing to a optimistic snowboarding expertise. The Flight Attendant occupied a selected area of interest throughout the market, catering to riders searching for a flexible all-mountain board able to dealing with various terrain whereas demanding a sure degree of competence to unlock its full potential.
6. Float in Powder
The 2018 Burton Flight Attendant’s skill to drift in powder stemmed from a mix of design options working in live performance. The directional form, characterised by an extended nostril and shorter tail, performed an important position. This design displaces snow in the direction of the longer nostril, lifting the entrance of the board and stopping it from sinking in deep powder. This raise, mixed with the rockered nosean upward curve beginning sooner than on a standard camber profilefurther enhances float by growing the floor space on the entrance of the board. The setback stance, positioning the rider barely behind the board’s heart, enhances these options by shifting weight in the direction of the tail, additional leveraging the nostril’s lifting capabilities. These design selections, working synergistically, allow the rider to take care of pace and management in deep snow with out expending extreme power.
Think about a rider descending a steep, powder-filled slope. The Flight Attendant’s longer nostril and rocker profile naturally rise within the deep snow, stopping the board from submerging. This enables the rider to take care of momentum and make managed turns with out the entrance of the board diving. The setback stance additional enhances this impact, stopping the rider from being thrown ahead. The mixed result’s a clean, managed descent in powder situations, permitting the rider to expertise the easy glide attribute of well-designed powder boards. Conversely, a board missing these options would are inclined to sink in deep snow, requiring better rider exertion and doubtlessly resulting in lack of management.
Float in powder is a essential efficiency attribute for all-mountain snowboards just like the 2018 Flight Attendant. This functionality expands the board’s usable terrain, permitting riders to confidently discover ungroomed slopes and deep snow situations. Whereas not a devoted powder board, the Flight Attendant’s design options supplied enough float to reinforce the general all-mountain expertise. Understanding the interaction of those design parts offers worthwhile perception into the board’s efficiency traits and supposed use. This understanding helps riders choose tools acceptable for his or her driving model and most well-liked terrain.
7. Secure at Velocity
Stability at pace is a essential efficiency attribute for the 2018 Burton Flight Attendant, straight influencing rider confidence and management, significantly on groomed runs and at larger velocities. A number of design parts contribute to this stability, permitting riders to take care of composure and execute exact maneuvers even in difficult situations. Analyzing these parts offers worthwhile perception into the board’s supposed use and target market.
-
Directional Form and Camber
The mix of a directional form and directional camber profile contributes considerably to stability at pace. The longer nostril and rocker profile present raise and stop the board from diving, whereas the camber part underfoot maintains edge grip and responsiveness. This mix permits for managed turns and prevents pace wobbles, a standard difficulty with much less secure boards at larger velocities.
-
Medium Flex
The medium flex score offers a steadiness between responsiveness and stability. Whereas a softer flex may really feel unstable at pace, and a stiffer flex might be unforgiving, the medium flex of the Flight Attendant absorbs vibrations and maintains composure, permitting riders to take care of management with out extreme effort.
-
Sidecut Radius
The sidecut radius, although particular measurements differ relying on board size, performs a task in stability. A well-designed sidecut enhances the board’s different traits, facilitating clean flip initiation and stopping the board from feeling catchy or unpredictable at pace.
-
Development and Supplies
The inner building of the board, together with the core supplies and fiberglass layup, contributes to torsional stiffness and general stability. These supplies affect how the board responds to forces at excessive speeds, resisting twisting and sustaining a constant edge grip, additional enhancing stability.
These parts work synergistically to ship a secure experience at pace, a defining attribute of the 2018 Burton Flight Attendant. This stability permits riders to confidently push their limits on groomed runs and keep management in variable snow situations. For intermediate and superior riders searching for a flexible all-mountain board able to dealing with larger speeds with out compromising management, the Flight Attendant’s deal with stability turns into an important think about tools choice.
8. 2017-2018 Season Mannequin
The designation “2017-2018 season mannequin” is essential for understanding the 2018 Burton Flight Attendant throughout the context of snowboard know-how and market availability. This designation signifies the mannequin yr for which the board was designed, manufactured, and launched on the market. This timeframe offers essential context for evaluating the board’s options, know-how, and relevance throughout the broader evolution of snowboard design.
-
Mannequin Yr Significance
Snowboard know-how, like many different shopper merchandise, undergoes steady growth. The mannequin yr designation permits customers to determine a board’s placement inside this evolutionary timeline. The 2017-2018 season signifies the interval throughout which the Flight Attendant was thought of a present mannequin, incorporating Burton’s newest technological developments and design philosophies at the moment. This designation helps differentiate it from earlier or later iterations of the Flight Attendant or different Burton snowboards.
-
Availability and Market Context
The 2017-2018 season mannequin designation signifies when the board was available within the retail market as a brand new product. As subsequent mannequin years are launched, older fashions are sometimes phased out. Understanding this lifecycle is essential for potential patrons, because it informs buying choices. These particularly searching for a 2018 Flight Attendant would probably must discover the used market or remaining new previous inventory, recognizing that its options and know-how may mirror the design traits of that particular interval.
-
Technological Context
The 2017-2018 timeframe offers a technological benchmark for assessing the Flight Attendant’s options. Evaluating the board’s specs and building to fashions from earlier or later years reveals the trajectory of snowboard design and technological developments inside Burton’s product line. This evaluation offers insights into the evolution of supplies, building strategies, and design philosophies.
-
Discontinuation and Legacy
The truth that the 2018 Flight Attendant is not a present mannequin highlights the continual evolution of snowboard know-how. Its discontinuation paves the best way for newer fashions incorporating up to date designs and supplies. Recognizing this cycle permits for a extra knowledgeable analysis of the board’s place throughout the broader historical past of snowboarding tools. Its legacy resides in its contribution to the development of all-mountain snowboard design and its affect on subsequent fashions.
Understanding the “2017-2018 season mannequin” designation offers an important framework for evaluating the 2018 Burton Flight Attendant. This designation situates the board inside a selected technological and market context, informing buying choices and providing insights into the evolution of snowboard design. Recognizing this temporal context is important for a complete understanding of the board’s options, efficiency traits, and general relevance throughout the snowboarding panorama.
9. Discontinued Product
The 2018 Burton Flight Attendant’s standing as a discontinued product considerably impacts its availability and market dynamics. Discontinuation sometimes happens when a producer ceases manufacturing of a specific mannequin, typically to introduce newer iterations with up to date designs, applied sciences, or market positioning. This course of is widespread throughout the snowboarding trade, pushed by steady innovation and evolving shopper preferences. Understanding the implications of discontinuation is essential for potential patrons searching for this particular mannequin.
The first consequence of discontinuation is lowered availability. Retailers sometimes deplete current inventory, and the product is not out there for buy by way of normal retail channels. This shortage typically drives demand throughout the used market, the place costs might fluctuate based mostly on situation, demand, and general market dynamics. Potential patrons searching for a 2018 Flight Attendant should navigate the secondary market, exercising due diligence relating to situation and authenticity. Moreover, discontinued merchandise might lack producer help, together with guarantee protection and alternative elements availability. This issue warrants cautious consideration, particularly for gadgets topic to put on and tear, resembling snowboards.
The discontinued standing of the 2018 Burton Flight Attendant necessitates a strategic strategy for acquisition. Potential patrons ought to discover on-line marketplaces, used sporting items shops, and group boards devoted to snowboarding. Thorough analysis relating to pricing traits and situation assessments is essential to creating knowledgeable buying choices. Whereas discontinuation presents challenges, it additionally creates alternatives for discerning patrons to amass sought-after fashions at doubtlessly advantageous costs. Recognizing the implications of discontinuation offers a sensible perspective on availability, pricing, and potential limitations relating to producer help. This understanding empowers potential patrons to navigate the market successfully and make knowledgeable choices aligned with particular person wants and circumstances.
Incessantly Requested Questions
This part addresses widespread inquiries relating to the 2018 Burton Flight Attendant snowboard. The knowledge supplied goals to supply readability and help potential patrons in making knowledgeable choices.
Query 1: The place can one buy a 2018 Burton Flight Attendant?
As a discontinued mannequin, the 2018 Flight Attendant is not out there by way of licensed retailers. Potential patrons ought to discover on-line marketplaces specializing in used sporting items, native used sporting items shops, and on-line snowboarding communities or boards.
Query 2: What’s the typical worth vary for a used 2018 Flight Attendant?
Pricing varies based mostly on situation, dimension, and site. Researching comparable listings on related platforms offers an affordable estimate. Elements resembling situation of the bottom, edges, and prime sheet considerably affect market worth.
Query 3: Are alternative elements out there for this discontinued mannequin?
Acquiring alternative elements for discontinued snowboards may be difficult. Contacting Burton straight or licensed restore facilities may yield restricted choices. Exploring on-line boards and communities devoted to snowboarding might additionally present leads on sourcing elements.
Query 4: How does the 2018 Flight Attendant examine to newer Burton all-mountain fashions?
Newer fashions probably incorporate up to date supplies, applied sciences, and design philosophies. Researching present Burton all-mountain choices and evaluating their specs to the 2018 Flight Attendant offers insights into developments in snowboard design. Consulting skilled snowboard critiques can provide additional comparative evaluation.
Query 5: What’s the beneficial talent degree for driving the 2018 Flight Attendant?
This mannequin is usually fitted to intermediate to superior riders. Its directional form, camber profile, and medium flex require a sure degree of competence for optimum management and efficiency. Rookies may discover these traits difficult, whereas skilled riders can leverage them successfully.
Query 6: What are the important thing upkeep issues for this board?
Common waxing, edge sharpening, and base repairs are important for sustaining optimum efficiency and increasing the lifespan of any snowboard, together with the 2018 Flight Attendant. Consulting skilled tuning providers or researching correct upkeep strategies ensures acceptable care.
Cautious consideration of those continuously requested questions aids in making knowledgeable choices relating to the acquisition and upkeep of a 2018 Burton Flight Attendant snowboard. Thorough analysis and understanding of the board’s traits, availability, and potential limitations are important for a optimistic possession expertise.
The next part will provide concluding ideas on the 2018 Burton Flight Attendant, summarizing its key attributes and general legacy throughout the context of all-mountain snowboard design.
Suggestions for Driving a Board Just like the 2018 Burton Flight Attendant
Directional all-mountain boards just like the 2018 Burton Flight Attendant require particular driving strategies to maximise efficiency and pleasure. The next ideas provide steering for successfully using such boards in varied snow situations.
Tip 1: Weight Distribution in Powder
Keep a centered or barely set-back stance in powder. Keep away from leaning too far ahead, which may trigger the nostril to dive. Distributing weight evenly permits the rockered nostril to raise naturally, sustaining float and management.
Tip 2: Edge Management on Groomed Runs
Interact the sting successfully for highly effective carving on groomed runs. Directional camber requires deliberate edge engagement to provoke and keep turns. Exact strain management permits for clean, managed arcs.
Tip 3: Navigating Variable Snow Circumstances
Keep a balanced stance and adapt to altering snow situations. The medium flex offers adaptability, however lively weight distribution and edge management are important for sustaining stability and management in combined snow and chopped-up terrain.
Tip 4: Velocity Management and Stability
Handle pace successfully, significantly on steeper slopes. The directional form offers stability at larger speeds, however correct pace management is essential for sustaining maneuverability and avoiding uncontrolled descents.
Tip 5: Terrain Choice and Board Capabilities
Choose terrain acceptable for the board’s all-mountain design. Whereas versatile, boards just like the Flight Attendant are greatest fitted to groomed runs, powder, and combined situations. Keep away from terrain primarily designed for freestyle or park driving.
Tip 6: Common Upkeep for Optimum Efficiency
Keep the board’s base and edges by way of common waxing and sharpening. Correct upkeep ensures optimum efficiency and extends the lifespan of the board. Think about skilled tuning providers for complete care.
Tip 7: Understanding Board Limitations
Acknowledge the board’s limitations. Whereas versatile, a directional all-mountain board might not excel in extremely specialised areas like freestyle or excessive backcountry driving. Understanding these limitations permits for lifelike expectations and knowledgeable terrain selections.
By following the following tips, riders can successfully make the most of the capabilities of directional all-mountain snowboards just like the 2018 Burton Flight Attendant, maximizing efficiency and pleasure in varied snow situations. These strategies permit riders to adapt to altering terrain and unlock the board’s full potential.
The next concluding part summarizes the important thing attributes and general legacy of the 2018 Burton Flight Attendant, contextualizing its contribution to the evolution of all-mountain snowboard design.
Conclusion
The 2018 Burton Flight Attendant represented a selected level within the evolution of all-mountain snowboard design. Its mix of directional form, directional camber, and medium flex provided a balanced efficiency profile catering to intermediate and superior riders. Key attributes included stability at pace, float in powder, and flexibility throughout diversified terrain. As a discontinued mannequin, its availability is now confined to the used market, requiring potential patrons to navigate the secondary market strategically. Understanding its design philosophy and target market offers essential context for evaluating its relevance throughout the broader panorama of snowboarding tools.
The Flight Attendant’s legacy lies in its contribution to the continuing pursuit of versatile all-mountain efficiency. Its design selections mirror the will for a single board able to dealing with various situations, empowering riders to discover the mountain with confidence and flexibility. Whereas know-how continues to advance, the 2018 Flight Attendant stays a noteworthy instance of a selected design philosophy geared toward maximizing all-mountain versatility.
